Clearances needed between the panel array

    • 2014-12-02 at 09:57 #16257 Reply

      Dave
      Guest

      What are the clearances needed between the panel array and the edge of the roof? Are these binding? Why are these clearances given?

      I have read distances of between 12-16inches and the reason being due to wind loads. What would happen if these rules were not followed?

    • 2014-12-02 at 16:34 #16260 Reply

      Stuart
      Guest

      The clearance distances are laid down in the 2013 Guide to the Installation of a PV Panel System.

      A suitable minimum clearance zone from PV panels to roof edge is around 40-50cm.

      Hope this helps.




Cancel

Comments are closed.